Chip programming industry leader-ACROVIEW Technology recently released the latest programming software update and a list of newly supported chip models. Among them, Fresco Logic's Type-C PD 3.0 controller series, an FPGA 10M16SAU324, has been burned by Oncor's general-purpose programming. Supported by the recording platform AP8000.

The FL7102 is a highly integrated PD controller for the emerging USB 3.1 Type-C connector. It is an advanced Type-C power supply controller that supports PD 3.0. FL7102-2Q0 supports 2 PD ports and FL7102-2L0 supports 1 PD port. They feature integrated Aux switches, Billboard devices, Vconn switches, and support the TCPC specification in a single chip. They can be configured as DFP, UFP or DRP for various applications.

The USB interface chip of Fresco Logic FL7102-2L0. The FL7102 is a highly integrated PD controller for the emerging USB 3.1 Type-C connector. It is an advanced Type-C Power Delivery controller that supports PD 3.0. The FL7102-2Q0 supports two PD ports, while the FL7102-2L0 supports one PD port. They have integrated Aux switches, Billboard devices, Vconn switches, and support the TCPC specification in a single chip. They can be configured as DFP, UFP or DRP for various applications.

feature:

Small packages: QFN 40 and QFN 32 packages

PD 3.0 supports up to two Type-C ports

UCSI (USB Type-C Connector System Software Interface)

TCPC (Type-C Port Controller Interface Specification)

Fast role swap support

VCONN power switch

Integrated LDO regulator

I2C or SPI interface for TCPC messaging

I2C and GPIO interface for PD power control

Supports Type-C audio and debug accessories

dead battery support

Firmware programmable for DFP, UFP or DRP

In-system firmware update via USB

Support 12MHz or 24MHz crystal

Intel® MAX® 10 FPGAs are fabricated with TSMC's 55nm embedded NOR flash technology and support instant-on capability. Its integrated features include analog-to-digital converters (ADCs) and dual-configuration flash memory, allowing you to store two images on a single chip and dynamically switch between images. Unlike CPLDs, Intel® MAX® 10 FPGAs also include full-featured FPGA features such as Nios® II soft embedded processor support, digital signal processing (DSP) blocks, and soft DDR3 memory controllers.

Intel® MAX® 10 FPGAs provide advanced processing capabilities in low-cost instant-on small form factor programmable logic devices that revolutionize nonvolatile integration. They offer instant-on dual configurations supporting analog-to-digital converters (ADCs), and full-featured FPGA functionality optimized for a variety of cost-sensitive, high-volume applications, including industrial, automotive, and communications.

Intel® MAX® 10 FPGAs reduce system-level cost by increasing the level of integration of system component functions:

Dual configuration flash: Supports dual configuration on the same die flash with thousands of reprogrammable cycles for true failsafe updates.

 Analog block: The analog block with integrated ADC and temperature sensor provides lower latency through more flexible sample ordering and reduces board area.

Instant turn-on: The Intel® MAX® 10 FPGA may be the first device on a system board that can be used to control the start-up of other components (high-density FPGAs, ASICs, ASSPs, processors, etc.).

Nios® II Soft Embedded Processor: Intel® MAX® 10 FPGA supports the integration of the soft Nios II embedded processor, providing embedded developers with a single-chip, fully configurable, instant-on processor subsystem .

DSP block: As the first non-volatile FPGA with DSP, the Intel® MAX® 10 FPGA is ideal for high-performance, high-precision applications with integrated 18x18 multipliers.

DDR3 External Memory Interface: Intel® MAX® 10 FPGAs support DDR3 SDRAM and LPDDR2 interfaces through a soft intellectual property (IP) memory controller, ideal for video, datapath, and embedded applications.

Complex control management: realize software-controlled system management through Nios II soft-core embedded processor.

Single core voltage support: single power supply products required for power-on sequence management

The AP8000 universal writer independently developed by Angke Technology includes three parts: the host, the bottom plate, and the adapter seat.

The host supports USB and NET connections, allowing multiple programmers to be networked to achieve the purpose of simultaneously controlling multiple programmers and burning at the same time. The built-in chip safety protection circuit ensures that even if the chip is reversed or short-circuited due to other reasons, it can be detected immediately and power off to ensure the safety of the chip and the programmer. Embedded high-speed FPGA greatly accelerates data transmission and processing. There is an SD card slot on the back of the host. Put the project file created by the PC software in the root directory of the SD card and insert it into the card slot. Through the buttons on the programmer, the project file can be selected, loaded, and burned, etc. Command, in order to achieve the purpose of being able to operate without the PC, which greatly reduces the cost of PC hardware configuration, and is convenient and quick to match the working environment.

AP8000 makes the host more expandable by adding an adapter board to the base plate. At present, it has supported devices produced by all mainstream semiconductor manufacturers, including TI, ST, MicroChip, Atmel, Hynix, Macronix, Micron, Samsung, Toshiba, etc. The supported device types are NAND, NOR, MCU, CPLD, FPGA, EMMC, etc., and file formats including Intel Hex, Motorola S, Binary, POF, etc. are supported.

About Intel:

Intel is a global leader in the semiconductor industry and computing innovation, founded in 1968. Today, Intel is transforming into a data-centric company. Together with its partners, Intel promotes innovation and application breakthroughs in transformative technologies such as artificial intelligence, 5G, and intelligent edge, and drives a smart, connected world. In 2015, Intel acquired Altera and entered the field of programmable processor chip FPGA, which is mainly used in telecommunication and wireless communication equipment, involving military equipment, automobile, network, industry and other industries.

About ACROVIEW Technology:

ACROVIEW is the world's leading provider of semiconductor chip programming solutions. The company insists on changing the world with technology, driving the future with intelligence, and continuously creating value for customers. ACROVIEW's AP8000 universal programmer platform and the latest IPS5000 programming automation solution provide one-stop solutions for customers in the semiconductor and electronic manufacturing fields. The company has served global leading customers such as Huawei, BYD, and Foxconn.