Feature:

• 48MHz Cortex®-M0+ 32-bit CPU platform

• memory

– 128 KB Flash memory with read and write protection

– 8 KB of SRAM memory

• Power supply

– VDD=2.5~5.5V

• Clock, crystal oscillator

– External crystal oscillator 32.768KHz

– Internal high-speed crystal oscillator RC1M

– Internal low-speed crystal oscillator RC32K

– PLL clock PLL48M

– SysClock 48M/24M/12M/6M/3M/1.5M/0.75M

– IWDG clock source RC32K

• Multiple general purpose I/O pins

– All I/O can map external interrupt

• Timer/Counter

– One 16-bit advanced control timer (TIM1)

– Five 16-bit general-purpose timers (TIM3, TIM14, TIM15, TIM16, TIM17)

– 1 x 20-bit basic timer (TIM6)

– Independent watchdog (IWDG)

– Window watchdog (WWDG)

– System tick timer (SysTick Timer)

• RTC with alarm and calendar

• Communication Interface

– 2-way UART standard communication interface, independent clock

– 2-way SPI standard communication interface, support master-slave mode

– 2-way I2C standard communication interface, support master-slave mode, high-speed mode 1Mb/s communication rate

• 32-channel DMA controller

• 12-Bit, 1.0µs ADC (Multichannel)

• CRC calculation unit

• Reset method

– Power-on/power-down reset (POR/PDR)

– Brown-out Reset (BOR)

– soft reset

– Watchdog reset

– External pin reset

– Shutdown mode reset

• Operating mode

– normal operation (Active)

– Low power mode

– Sleep mode (Sleep)

– Deep sleep (Deepsleep)

– Shutdown mode (Shutdown)

• SWD debugging

• working conditions

– 2.5~5.5V

– - 40℃~85℃

• Package form: LQFP48/LQFP32/QFN32

overall block diagram

The AP8000 universal chip programmer independently developed by Angke Technology includes three parts: the host, the base plate, and the adapter seat.

The host supports USB and NET connections, allowing multiple IC programmers to be networked to achieve the purpose of simultaneously controlling multiple programmers to burn at the same time. The built-in chip safety protection circuit ensures that even if the chip is reversed or a short circuit caused by other reasons can be detected immediately and the power will be cut off to ensure the safety of the chip and programmer. Embedded high-speed FPGA greatly accelerates data transmission and processing. There is an SD card slot on the back of the main unit. Put the project file produced by the PC software into the root directory of the SD card and insert it into the card slot. The project file can be selected, loaded, and programmed through the buttons on the programmer. command, in order to achieve the purpose of operating without PC, which greatly reduces the cost of PC hardware configuration, and can be conveniently and quickly matched with the working environment.

AP8000 makes the mainframe more expandable by adding an adapter board to the backplane. Currently, it supports devices produced by all mainstream semiconductor manufacturers, including TI, ST, MicroChip, Atmel, Hynix, Macronix, Micron, Samsung, Toshiba, etc. Supported device types include NAND, NOR, MCU, CPLD, FPGA, EMMC, etc., and support file formats including Intel Hex, Motorola S, Binary, POF, etc.

About BYD Semiconductor: BYD Semiconductor (BYD) is a leading IDM company in China, mainly engaged in power semiconductors, intelligent control ICs, smart sensors, optoelectronic semiconductors, semiconductor manufacturing and services, covering the sensing and processing of optical, electrical, magnetic and other signals And control, the products are widely used in the fields of automobile, energy, industry and consumer electronics, etc., and have broad market prospects. BYD Semiconductor is determined to become an efficient, intelligent and integrated new semiconductor supplier.

About Acroview Technology: ACROVIEW is Global Leader of semiconductor Automatic Programming Solutions. The company insists on changing the world with technology, driving the future with intelligence, and continuously creating value for customers. A's AP8000 universal programmer platform and the latest IPS5000 programming automation solution provide one-stop solutions for customers in the semiconductor and electronics manufacturing fields. The company has served global leading customers including Huawei, BYD, Foxconn and so on.