GD32E503RCT6 is a 32-bit general-purpose microcontroller based on the Arm® Cortex®-M33 processor. The Cortex®-M33 processor is based on the Armv8 architecture. The main frequency of the processor can reach up to 180MHz, and it supports a powerful and scalable instruction set, including general data processing I/O control tasks, enhanced data processing bit field operations, DSP and floating point unit (FPU).

GD32E503RCT6 is also equipped with a new hardware trigonometric function accelerator (TMU), which can support mathematical trigonometric operations such as vector, sine cosine, exponent, square root, common logarithm, etc., to reduce the CPU burden and improve processing efficiency. A Memory Protection Unit (MPU) is used to improve system reliability.

The chip is powered by 1.7V-3.6V, the I/O port can withstand 5V level, and can work in the temperature range of -40℃~85℃. The family offers five power-saving modes with full flexibility to maximize optimization between wake-up latency and power consumption, which is an especially important consideration in low-power applications.

GD32E503RCT6 is suitable for a series of rich application scenarios such as high-precision industrial control, digital power supply, motor frequency conversion, measuring instruments, mixed signal processing, and high-end consumer products.

Main features:

• Ultra High Precision Timer

- Support multiple high-precision PWM signal output

- High resolution 90ps

• Excellent mixed signal integration

- Indicates high-performance ADC with fully differential input

- 3 ultra-fast comparators (22ns delay time)

- Both can be used in conjunction with high-precision timers

• Hardware accelerator

- Core independent multiplier/divider + DSP instruction set + FPU

- Trigonometric function operation accelerator TMU

• New peripherals increase connectivity

- USB2.0 OTG HS PHY+independent PLL

- 3 CAN FDs

- SQPI interface to expand external storage (Flash/PSRAM)

- On-chip integration of PSRAM cache

• Typical application in industrial environment

- Clock spread spectrum technology reduces EMI

- High noise immunity ESD 6KV

                                                Internal block diagram

The AP8000 universal programmer independently developed by Acroview Technology includes three parts: the host, the base plate, and the adapter seat.

 

The host supports USB and NET connections, allowing multiple programmers to be networked to achieve the purpose of simultaneously controlling multiple programmers to IC programmer at the same time. The built-in chip safety protection circuit ensures that even if the chip is reversed or a short circuit caused by other reasons can be detected immediately and the power will be cut off to ensure the safety of the chip and programmer. Embedded high-speed FPGA greatly accelerates data transmission and processing. There is an SD card slot on the back of the main unit. Put the project file produced by the PC software into the root directory of the SD card and insert it into the card slot. The project file can be selected, loaded, and programmed through the buttons on the programmer. command, in order to achieve the purpose of operating without PC, which greatly reduces the cost of PC hardware configuration, and can be conveniently and quickly matched with the working environment.

AP8000 makes the mainframe more expandable by adding an adapter board to the backplane. Currently, it supports devices produced by all mainstream semiconductor manufacturers, including TI, ST, MicroChip, Atmel, Hynix, Macronix, Micron, Samsung, Toshiba, etc. Supported device types include NAND, NOR, MCU, CPLD, FPGA, EMMC, etc., and support file formats including Intel Hex, Motorola S, Binary, POF, etc.

About GigaDevice Innovation: Established in 2005, GigaDevice is a leading fabless semiconductor company dedicated to developing advanced memory technology, MCU, and sensor solutions. The company's core product line includes memory, 32-bit general-purpose MCU, intelligent human-machine interaction sensor chips, and overall solutions. Its products are known for their high performance and low power consumption, and are used in industrial, automotive, computing, and consumer electronics industries Provide comprehensive services to customers in the Internet of Things, mobile applications, and network and telecommunications industries.

About ACROVIEW Technology: ACROVIEW is Global Leader of Semiconductor chip programmer solutions. The company adheres to changing the world with technology, driving the future with intelligence, and continuously creating value for customers. Angko's AP8000 universal burner platform and the latest IPS5000 burner automation solution provide one-stop solutions for customers in the semiconductor and electronic manufacturing fields. The company has served leading global customers such as Huawei, BYD, and Foxconn.