CC2652R1FRGZR is a multi-protocol 2.4GHz wireless microcontroller that supports Thread, Zigbee, Bluetooth 5.2 low energy, IEEE802.15.4, smart objects supporting IPv6 (6LoWPAN), proprietary systems including Stack) and multiple concurrent protocols implemented through Dynamic Multiprotocol Manager (DMM) drivers. The device is optimized for low power wireless communication and advanced detection in the building security systems, HVAC, medical, wired networking, portable electronics, home theater and entertainment, and networking peripherals markets.

Salient features of the device include:

• SimpleLink™ CC13x2 and CC26x2 Software Development Kit (SDK) provides rich and flexible protocol stack support.

• Extends battery life in wireless applications with low standby current of 0.94µA with full RAM retention.

• Supports industrial temperatures with a minimum standby current of 11µA at 105°C.

• Advanced detection through a programmable, autonomous, ultra-low-power sensor controller CPU with fast wake-up. For example, a sensor controller capable of 1Hz ADC sampling at 1µA system current.

• Low SER (soft error rate) FIT (failure in time base) for extended operating life without disruption to industrial markets, and SRAM parity always on to prevent damage from potential radiation events.

• A software-controlled dedicated radio controller (Arm®Cortex®-M0) provides flexible, low-power RF transceiver functionality supporting multiple physical layer and RF standards.

• Excellent radio sensitivity and robustness (selectivity and blocking) performance for Bluetooth® Low Energy (-105dBm for 125kbps LE coded PHY).

The CC2652R1FRGZR is part of the SimpleLink™ MCU platform, which includes Wi-Fi, Bluetooth Low Energy, Thread, Zigbee, Sub-1GHz MCUs, and host MCUs that share a common, easy-to-use development environment including single-core software development Kit (SDK) and rich tool set. With the once-integrated SimpleLink™ platform, any combination of devices from the portfolio can be added to your design, enabling 100% code reuse as design requirements change.

Main features:

• microcontroller

– Powerful 48MHz Arm Cortex-M4F processor

– 352KB in-system programmable flash memory

– 256KB ROM for protocol and library functions

– 8KB cached SRAM (also available as general purpose RAM)

– 80KB of ultra-low-leakage SRAM protected by parity for highly reliable operation

– 2-pin cJTAG and JTAG debug

– Support over-the-air (OTA) upgrade

• Ultra-low power sensor controller with 4KB SRAM

– Sampling, storing and processing sensor data

– Runs independently of the system CPU

– Fast wake-up into low-power operation

• TI-RTOS, drivers, bootloader, Bluetooth 5.2 low energy controller and IEEE 802.15.4 MAC embedded in ROM, optimizing application size

• RoHS compliant package 7mm×7mm RGZ VQFN48 (31 GPIOs)

• Peripherals

– Digital peripherals can be connected to any GPIO

– 4 32-bit or 8 16-bit general-purpose timers

– 12-bit ADC, 200ksps, 8 channels

– 2 Comparators with Internal Reference DAC (1 Continuous Time Comparator, 1 Ultra Low Power Comparator)

– Programmable current source

– 2 asynchronous transceivers (UARTs)

– 2 synchronous serial interfaces (SSI) (SPI, MICROWIRE, and TI)

– I2C and I2S

– Real Time Clock (RTC)

– AES 128-bit and 256-bit encryption accelerometer

– ECC and RSA public key hardware accelerators

– SHA2 Accelerator (includes full suite up to SHA-512)

– True Random Number Generator (TRNG)

– Capacitive detection, up to 8 channels

– Integrated temperature and battery monitor

• external system

– On-chip step-down DC/DC converter

• Low power consumption

– Active mode RX: 6.9mA

– Active mode TX(0dBm): 7.3mA

– Active mode TX(5dBm): 9.6mA

– Active mode MCU 48MHz(CoreMark): 3.4mA(71µA/MHz)

– Sensor Controller (Low Power Mode, 2MHz, Running Infinite Loop): 30.1µA

– Sensor controller (active mode, 24MHz, running infinite loop): 808µA

– Standby current: 0.94µA (RTC running, 80KB RAM and CPU retention)

– Shutdown Current: 150nA (Wakeup on External Event)

• Radio section

– 2.4GHz RF transceiver compatible with Bluetooth Low Energy 5.2 and early LE specifications as well as IEEE 802.15.4 PHY and MAC

– 3-wire, 2-wire, and 1-wire PTA coexistence mechanism

– Excellent receiver sensitivity: -100dBm for 802.15.4 (2.4GHz) and -105dBm for Bluetooth 125kbps (LE coded PHY)

– Up to +5dBm output power with temperature compensation

– Suitable for systems that comply with various worldwide RF regulations

• wireless protocol

– Thread, Zigbee, Bluetooth 5.2 Low Energy, IEEE802.15.4, IPv6-enabled Smart Objects (6LoWPAN), Proprietary Systems, SimpleLink™ TI 15.4 stack (2.4GHz), and Dynamic Multiprotocol Manager (DMM) drivers

• Development tools and software

– CC26x2R LaunchPad™ Development Kit

– SimpleLink™ CC13x2 and CC26x2 Software Development Kit (SDK)

– SmartRF™Studio for simple radio configuration

– Sensor Controller Studio for building low-power sensing applications

application

• 2400 to 2480MHz ISM and SRD systems with receive bandwidth down to 4kHz

• Building automation

– Building security system

– Motion detectors, electronic smart locks, door and window sensors, garage door systems, gateways

– HVAC

– Thermostats, wireless environmental sensors, HVAC system controllers, gateways

– Fire safety system

– Smoke and heat detectors, fire alarm control panels (FACP)

- Video Surveillance

– IP webcam

– Lifts and escalators

– Elevator control boards for elevators and escalators

• Grid infrastructure

- Smart Meter

– Water, gas, electricity and heat distribution meters

– Grid communication

- Wireless communication

– Long range sensor applications

– Other alternative energy sources

– energy harvesting

• Industrial transport

– Asset Tracking

• Factory automation and control

• Medical

• Electronic Point of Sale (EPOS)

– Electronic shelf labels (ESL)

• communication device

– wired network

– Wireless LAN or Wi-Fi access points, edge routers, small business routers

• Personal Electronics

– Portable Electronics

– RF smart remote

– Home theater and entertainment

– Smart speakers, smart displays, set-top boxes

– Networked peripherals

– Consumer wireless modules, pointing devices, keyboards

- game

– Electronic toys and robot toys

– Wearables (non-medical)

– Smart trackers, smart clothing

Functional block diagram

The AP8000 universal ic programmer independently developed by Acroview Technology includes three parts: the host, the base plate, and the adapter seat.

The host supports USB and NET connections, allowing multiple universal ecu programmer to be networked to achieve the purpose of simultaneously controlling multiple programmers to burn at the same time. The built-in chip safety protection circuit ensures that even if the chip is reversed or a short circuit caused by other reasons can be detected immediately and the power will be cut off to ensure the safety of the chip and programmer. Embedded high-speed FPGA greatly accelerates data transmission and processing. There is an SD card slot on the back of the main unit. Put the project file produced by the PC software into the root directory of the SD card and insert it into the card slot. The project file can be selected, loaded, and burned through the buttons on the programmer. command, in order to achieve the purpose of operating without PC, which greatly reduces the cost of PC hardware configuration, and can be conveniently and quickly matched with the working environment.

AP8000 makes the mainframe more expandable by adding an adapter board to the backplane. Currently, it supports devices produced by all mainstream semiconductor manufacturers, including TI, ST, MicroChip, Atmel, Hynix, Macronix, Micron, Samsung, Toshiba, etc. Supported device types include NAND, NOR, MCU, CPLD, FPGA, EMMC, etc., and support file formats including Intel Hex, Motorola S, Binary, POF, etc.

About Texas Instruments: Texas Instruments (Texas Instruments, referred to as: TI) is the largest manufacturer of analog circuit technology components in the world, and a world-renowned semiconductor multinational company. Research, manufacture and sales of innovative digital signal processing and analog circuits. In addition to the semiconductor business, it also provides solutions including sensing and control, educational products and digital light source processing. Texas Instruments is the world's largest manufacturer of digital signal processors (DSP) and analog circuit components, and its analog and digital signal processing technologies have a dominant position in the world.

About ACROVUEW Technology: ACROVIEW is the world's leading provider of semiconductor chip programming solutions. The company insists on changing the world with technology, driving the future with intelligence, and continuously creating value for customers. Acroview's AP8000 universal programmer platform and the latest IPS5000 programming automation solution provide one-stop solutions for customers in the semiconductor and electronics manufacturing fields. The company has served global leading customers including Huawei, BYD, Foxconn and so on.